Go to main content
Master Crafted Home
Search

Search Master Crafted Home

60-30-10 Color Palette Builder with Contrast and LRV Check

Published on

The 60-30-10 rule is a design convention: about 60% of a room in one dominant colour, 30% in a supporting colour and 10% in an accent. This builder takes three colours, or builds the other two from your base, and then checks them with two published yardsticks: the WCAG 2.2 contrast ratio (4.5:1 for text) and a light reflectance value difference of more than 30 points, the benchmark in England's Approved Document M for surfaces that contrast visually.

60-30-10 color palette builder

Type three hex colours, or give a base and let the builder suggest the other two. Results update as you type and the colours are saved in the page address so you can bookmark or share them. Nothing leaves your browser.

Your colours

Walls and large surfaces. Example: #E8E2D6.

Curtains, chairs, furniture. Ignored when building.

Art, cushions, objects. Ignored when building.

Walls, large furniture and soft furnishings together. Leave blank to skip.

Your palette check

How the palette builder works

Each hex colour is converted to its WCAG 2.2 relative luminance. Multiplying by 100 gives our estimate of its light reflectance value. The contrast ratio of any pair is the lighter luminance plus 0.05 divided by the darker plus 0.05. We then show whether each pair clears the WCAG thresholds and whether its LRV gap is more than the Approved Document M benchmark.

Luminance, LRV and contrast
channel c = value ÷ 255;  linear = c ÷ 12.92 if c ≤ 0.04045, else ((c + 0.055) ÷ 1.055)^2.4
luminance L = 0.2126 × R + 0.7152 × G + 0.0722 × B   (linear channels)
estimated LRV = L × 100
contrast ratio = (L lighter + 0.05) ÷ (L darker + 0.05)
area split = area × 60 ÷ 100, × 30 ÷ 100, × 10 ÷ 100
L
relative luminance, 0 for black to 1 for white (WCAG 2.2 definition)
LRV gap
difference between two LRVs, in points

Worked example

Given: base #E8E2D6 (warm greige); secondary #4A4A40 (olive charcoal); 500 sq ft of surfaces to split.

  1. Base: linear channels from 232, 226 and 214 give L = 0.2126 × 0.807 + 0.7152 × 0.761 + 0.0722 × 0.672 = 0.764, LRV about 76
  2. Secondary: from 74, 74 and 64 L = 0.2126 × 0.068 + 0.7152 × 0.068 + 0.0722 × 0.051 = 0.067, LRV about 7
  3. Contrast ratio: (0.764 + 0.05) ÷ (0.067 + 0.05) = 6.9
  4. LRV gap: 76.4 − 6.7 = about 70 points, well over 30
  5. Area split of 500 sq ft: 300 sq ft, 150 sq ft and 50 sq ft

Answer: This pair clears 4.5:1 and the 30 point LRV benchmark, and 500 sq ft splits into 300, 150 and 50.

Thresholds used

Published thresholds behind the checks
CheckValueSource
WCAG contrast, normal text 4.5:1Source 2
WCAG contrast, large text and graphics 3:1Source 2
Contrast visually (Approved Document M) LRV difference greater than 30 pointsSource 3
Same, where illuminance is above 200 lux at least 20 pointsSource 3
Same, projecting door furniture at least 15 pointsSource 3
LRV scale 0 (absorbs all light) to 100 (reflects all light)Source 4
Room proportions 60% / 30% / 10%Source 1 (a design convention)

Approved Document M applies to buildings other than dwellings in England. We use it as a benchmark, not as a requirement for your home.

Assumptions and limits

  • The LRV is estimated from a screen hex colour. Your display, the light in the room and the paint sheen change what you see, and paint makers print a measured LRV; use theirs when you have it.
  • The ratios 60-30-10 are a convention. Many good rooms break them, and tone-on-tone minimalist rooms deliberately have small contrasts.
  • The WCAG ratio was written for text on screens and is used here as a legibility yardstick. The LRV gap is the more relevant paint-to-paint measure.
  • Build from base is a simple rule of hue and lightness. It does not know undertones, materials or light direction.
  • Thresholds are as published on 2026-11-13.

Your questions answered

What is the 60-30-10 rule?

It is a design convention for balancing colour: roughly 60% of the room in a main colour (walls and large pieces such as a rug), 30% in a supporting colour (curtains, chairs, furniture) and 10% in an accent. The National Association of Realtors describes it this way. It is guidance, not a standard, and plenty of designers break it on purpose.

What is light reflectance value (LRV)?

LRV is the percentage of visible light a surface reflects, on a scale from 0 (absorbs all light) to 100 (reflects all light), as Sherwin-Williams describes it for its colour chips. Paint makers print the measured figure on the chip or the can. Our figure for a screen colour is an estimate, so use the printed LRV when you have it.

How is the LRV estimated here?

We compute the WCAG 2.2 relative luminance of the hex colour, which is the same quantity as the luminous reflectance of a surface seen in daylight, and multiply by 100. Screens, lighting and paint sheen mean a real paint can differ by several points, so use this for comparing colours with each other.

What does a 30 point LRV difference mean?

England's Approved Document M, Volume 2 (2015 edition), says two surfaces contrast visually when the difference in LRV is greater than 30 points, down to a minimum of 20 points where illuminance on the surfaces is above 200 lux, and 15 points for projecting door furniture. It applies to buildings other than dwellings, so treat it as a benchmark for readable edges, such as a dark door against a light wall, not as a rule for your home.

Why check contrast ratio for paint colours?

The WCAG ratio is written for screens, where 4.5:1 is the minimum for normal text and 3:1 for large text. It is a useful yardstick when a colour pair has to carry words, such as a sign, a house number or art lettering on a painted wall. For paint-to-paint relationships, the LRV difference is the more relevant check.

Should the three colours have a big contrast?

Not necessarily. Minimalist and tone-on-tone rooms deliberately keep colours close, and this tool will report a small LRV gap for them. The checks tell you how much the colours separate, they do not say that a low number is wrong.

How does the Build from base option choose colours?

It is a convention-based shortcut, not a standard: tonal keeps the hue and changes lightness, analogous shifts the hue by 30 degrees, and complementary uses the opposite hue for the accent. The secondary is moved lighter or darker than the base so the three stay distinct. Treat the result as a starting point and edit the hex values.

Can I split the room by square feet?

Yes. Enter the total surface area you want to colour, such as walls, large furniture and soft furnishings, and the tool splits it 60, 30 and 10. It is a visual guide, not a paint quantity, so use the paint calculator on a surface-by-surface basis to buy paint.

References

  1. National Association of Realtors: The 60-30-10 Way to Add Color Without Going Overboard (nar.realtor) Accessed 2026-11-13.
  2. W3C: WCAG 2.2, Understanding SC 1.4.3 Contrast (Minimum): contrast ratio formula and thresholds; relative luminance definition at w3.org/TR/WCAG22 (w3.org) Accessed 2026-11-13.
  3. UK Government: Approved Document M, Volume 2, Access to and use of buildings other than dwellings (2015 edition), definition of contrast visually (gov.uk) Accessed 2026-11-13.
  4. Sherwin-Williams: Worthy of Reflection (LRV scale from 0 to 100 on every colour chip) (sherwin-williams.com) Accessed 2026-11-13.

More guides like this